TES Accessories

AH108 Hose Assy 3/4" TES Red 50'
3/4" x 50' Red high-temperature insulated hose assembly with 3/4" M-F quick connects for connecting TES inletsolution tee to inlet of heater. Pre-charged with TES fluid.
 
AH10L QD Wrap Lrg 1/2"X3/4" Splitters

QD Wraps

Insulated protective wraps for TES Solution Tees.

These wraps are just what you need to protect you and your client from the possible damage created when a steaming hot quick connect meets with carpet or bangs into floors or furniture.  Just wrap up each quick connect and you're completely insulated from some pretty heated discussions.

 
AH10M QD Wraps Medium For 1/2-3/4 QDS

QD Wraps

Insulated protective wraps for TES Solution Tees.

These wraps are just what you need to protect you and your client from the possible damage created when a steaming hot quick connect meets with carpet or bangs into floors or furniture.  Just wrap up each quick connect and you're completely insulated from some pretty heated discussions.

 
AH110 Hose Assy 3/4" TES Blue 50'
3/4" x 50' Blue high-temperature insulated hose assembly with 3/4" M-F quick connects for connecting TES inlet solution tee to inlet of heater.Pre-charged with TES fluid.
 
AH112 Hose Assy 5/8 Red 50' - TES

tes 5/8" Hose

Red - 50 Feet

5/8" x 50' Red, high-temperature, insulated hose assembly with 1/2" M-F quick connects for connecting tes outlet solution tee to inlet of heat exchanger.
Pre-charged with tes fluid.

 
AH114 Hose Assy 5/8 Blue 50' - tes

tes

Blue - 50 Feet

5/8" x 50' Blue, high-temperature, insulated hose assembly with 1/2" M-F quick connects for connecting tes outlet solution tee to inlet of heat exchanger.
Pre-charged with tes fluid.

 
AH115 TES Inlet Solution Tee - Brass
(1) 3/4" female
(3) 1/2" male QC
 
AH118 Hose Assy 5/8 25' Blue tes 25' Hose Accessory for tes

tes 5/8" Hose

Blue - 25 Feet

5/8" x 25' Blue, high-temperature, insulated hose assembly with 1/2" M-F quick connects for connecting tes outlet solution tee to inlet of heat exchanger.
Pre-charged with tes fluid.

 
AH119 TES Outlet Solution Tee - Brass
(1) 3/4" male QC
(3) 1/2" female QC
 
AT101 TIE-OFF RING - E-TRACK

E-Track Tie Off Ring

 
AT106 TES Snout Adapter - 4 x 4"
The new Snout Adapter is now available for the TES and E-TES High Speed Structural Drying Systems. The Snout Adaptor allows you to fine tune your focused heat to the exact areas you need to dry. The Snout Adapter fits easily over the front of the TES TEX box or the E-TES 120 or 240 unit. The snout adaptor allows the restorer to utilize the 4 inch high temperature flex ducts to distribute heat to multiple surfaces all at the same time. The Snout Adapter is great for directing heat in drying cabinets, attics, or any other hard to reach areas. The kit includes one snout adapter, two 25' high temperature flex ducts, two snout covers, a bungee cord, and four vent clamps.
 
AT50 DOOR ROD 23" TO 40" HOLDS UP HOSES FOR TES
Adjustable door rod used to hold hoses up off the carpet to allow air flow through doorways to float hallway carpet and speed drying. Also effective for creating barriers with plastic sheeting. The AT50 adjusts to doorways from 23" to 40" wide.The AT51 adjusts from 42" to 72".
 
AT51 DOOR ROD 42"-72" HOLDS UP HOSES FOR TES
Adjustable door rod used to hold hoses up off the carpet to allow air flow through doorways to float hallway carpet and speed drying. Also effective for creating barriers with plastic sheeting. The AT50 adjusts to doorways from 23" to 40" wide. The AT51 adjusts from 42" to 72".
 
AT54 Duct Ring - Fits 10" Layflat Ducting
Duct Ring is placed inside 10" diameter lay-flat ducting to prevent collapse and reduce flapping for improved exhaust air flow.Actual Diameter: 10 3/8"
 
AT56 Duct Ring - Fits 14" Layflat Ducting
Duct Ring is placed inside 14" diameter lay-flat ducting to prevent collapse and reduce flapping for improved exhaust air flow.Actual Diameter: 14 1/2"
 
AT58 PAD PIN
Pad Pin used to secure pad to carpet around heat exchanger for air seal and improved float.
 
AT62 FLOATOR - 4 PIN STAINLESS STEEL
Stainless steel and aluminum furniture stand with rubber pad. Allows carpet to float underneath supported furniture. Improves airflow and speeds drying.
 
AT64 SANDBAG 10# FOR TES
Ten pound sand bag with convenient carrying handle. Bags are used to hold carpet on tack strip and seal carpet around heat exchanger. Can also be used to direct air flow. Made from plastic lined heavy duty polyester.
 
AT69 HOSE ASSEMBLY - PROPANETRIPLE TANK ADAPTER
Tes Propane Tank Adapter - 3 Tank

RESTORATION EQUIPMENT : TES EQUIPMENT

 
AT70 PROPANE TANK RACK
Holds three 100 lb tanks
 
AT76 FAN KIT
For trailer mounts, TES, or truckmount cooling
 
AT78 SUPPORT STAND- TES MOUNT

tes Support Stand

For Secure tes Mounting

Used under the tes unit with wheels attached to give extra stability during transport.

 
AT82 SAFETY LOCK-OUT CAP - PROPANE TANK VALVE COVER
Lockable cover protects propane tank valves and prevents tampering. (Does not include lock.)
 
AT84 TES Fluid Filter Kit
A complete filtering of the TES Thermal Fluid in the system should be performed after the first 300 hours of operation and every 1000 hours thereafter. Evidence of heavy build-up or excessive darkening of the fluid may indicate the need for more frequent filtering. (Kit includes 3 extra filter cartridges) NM4356A - Replacement Filter
 
AT90 PROPANE INSTALL KIT - FOR TES TRAILER
Kit Includes: (1) AT70,(1) AT69,(1) AT90H
 
AT90H TES Propane Hardware Kit - Trailer Propane System Parts
Kit Includes:(1) NM4334,(1) MR336,(1) NM4332,(1) NM4352,(1) BR282,(1) NM4320,(2) NM4342,(1) BR284,(1) NM4339,(1) NM4337,(1) BR296,(1) NM4348,(1) NM4350,(4) NM4370,(12) NM4372,and (1) PMEF-181
 
AT92 TES Exhaust Install Kit
For standard 200,000 BTU TES units.Kit includes: (1) NM4330,(1) NM4387, and (1) NM4390
 
AT94 EXHAUST INSTALL KIT - 250,000 250,000 BTU TES
For 250,000 BTU TES units.Kit includes: (1) NM4331,(1) NM4388, and (1) NM4391
 
AT96 TES FLOOR ANCHOR INSTALL KIT
Removable TES Trailer InstallKit includes:(1) AT52, (1) AT78, (4) NM4392, (4) NM4394, (4) NM4328, (4) NM4329, (12) NM4360, (12) NM4362, (12) PA114, and (12) PA116
 
CR01GL TES Thermal Energy Fluid - Gallon
TES Thermal Energy Fluid is a hydronic heat transfer fluid. It is a mixture of propylene glycol, de-ionized water and corrosion inhibitors.It is used to prevent freeze damage to the TES system if it shuts down in freezing conditions and to provide corrosion protection for the heater components. TES Thermal Energy Fluid is used in every TES unit, all hoses and TEX Thermal Exchangers. The freezing point of TES Thermal Fluid is thirty degrees below zero Fahrenheit (-30F).TES Thermal Energy Fluid is non-toxic. No VOC's. No hazardous ingredients. Exclusive for use with TES to protect machine and maintain warranty.
 
MB212 TEX THERMAL ENERGY EXCHANGER
Heat Transfer Enchanger used to transfer heat from TES solution to the flood water in the structure.Patent Number: 8789291B2Publication Number: US2014/0331516A1
 
MB230 Exhaust Controller
Thermostat control gives you the ability to adjust your exhaust air flow according to the room temperature in your drying area. Easily programmable for on-off operation of two fans with two different set point temperatures up to 140 degrees.
 
NM4356A FILTER CARTRIDGE 10" TES NYLON
Replacement filter for the AT84.