E-TES System

Fast and Profitable

Get in with a quick set-up, work your magic, and get out equally as fast. E-TES is an electric stand-alone version of the TEX box from the original TES. You can use one unit at a time as a stand alone heat dryer for the small job, or supplement a larger loss to target the tough area, or just add more heat.

Features

  • 50 foot Heavy Duty 30amp GFCI (Ground Fault Circuit Interrupter) Power Cord with 3-prong and a 4-prong adapter for Dryer Plugs
  • Adapters available for 3-prong and 4-prong Range outlets
  • Panel Lights indicate power and safety switch status
  • Safety Switches include:
    • Air Flow Switch
    • Dual Hi-Limit Temperature Switches
    • Safety Shutdown Temperature Switch
    • Ground Fault Circuit Interupter

Simple

  • Plug into any dryer or stove outlet (220-240 volt)
  • Add any centrifugal blower
  • Turn it on and dry with hot, dry air
  • Dry carpet, pad, and walls all at the same time
  • Dry inside walls and ceilings with hot, dry air, with the addition of an Octidry
  • Dry hardwood floors and crawl spaces

Specifications

21,000 BTU 240V Electric Model
Height: 19-7/8"
Length: 24"
Width: 20-5/8"
Weight: 39 lbs.
Heater watt rating: 6200 watts
Maximum Amp Draw: 25.83amps
Five year housing warranty
One year component warranty

Electricity usage is .62 cents per hour (6.2 kilowatts p/hr @ $0.0994 - U.S. average).

Specifications

10,230 BTU 120V Electric Model
Height: 19-7/8"
Length: 24"
Width: 20-5/8"
Weight: 39 lbs.
Heater watt rating: 3000 watts
Maximum Amp Draw: 12 amps per cord
Five year housing warranty
One year component warranty

Electricity usage is .62 cents per hour (6.2 kilowatts p/hr @ $0.0994 - U.S. average).